DC-Cable with blade fuse to supply the Wetech Car Kit.

**General Description**

The red wire can be connected to a 12V or 24V battery. The black wire should be connected to the ground (GND). Total length: 160 cm


**Compatibility**

Suitable to all Wetech Car Kits

Screw for fixing Mounting Bracket to the Car Kit. Suitable for all models.

DC Power Cable for connecting the SEPURA SRM3500 to the programming station.

**General Description**
Power Supply 230V AC
Specification: 12V / 1A DC

**Compatibility**

Suitable for all Wetech Car Kits and 1-fold Programming Stations.

SMA Antenna Adapter for using a Wetech Active or PassivePlus Car Kit.

**Compatibility**

Suitable for WTC632, WTC635, WTC662, WTC663, WTC668, WTC674, WTC675, WTC677, WTC679, WTC1709 and WTC1904.

**Application**

The adapter is screwed onto the radio so the external antenna connection can be used.

The TETRA PEI-interface PEI676 is connected to the SUB-D socket of WTC676 \[600076\] and establishes a connection between an inserted MTP850 and the LARDIS system.
The LARDIS system simplifies everyday life, by simple group changes of the radio, status handling and radio subscriptions (more information at Lardis.de).
Through the interface to the WTC676 you can use all these functions directly in your car.
To do this, the PEI adapter is connected to the WTC676 and connected to the LARDIS display with the connection cable.
As soon as your MTP850 is inserted into the Car kit, it is automatically recognized.

WeTech squelch module SQ676 offers the possibility to connect a MOTOROLA MTP850
(appointed in WTC676 \[600076\]) with a control console Major BOS 2a, 4/8a.

<a href="http://erp.wetech.local/document/share/120/41b0af57-6bfb-4e75-af68-6945c87f80e1" target="_blank">800891_Manual_en.pdf</a>

Wetech Squelch-Module AN014
Evaluates wether a radio channel is currently being spoken (Squelch).
Suitable for WTC601, WTC606, WTC631, WTC632, WTC635, WTC662, WTC663, WTC664, WTC667, WTC668, WTC682.

**General Description**

With the AN014 Squelch Module, the active Car Kit can be connected to a control console.
For the listed active Car Kits the AN014 Squelch Module is to purchase separately.
The attachment should be done by qualified personnel.

The corresponding documentation for installing the AN014 Squelch Module in your Car Kit can be found here:



Wetech Squelch-Module incl. Housing and Accessory.

The TETRA PEI-interface PEI676 is connected to the SUB-D socket of WTC676 \[600076\] and establishes a connection between an inserted MTP850 and the PC.
With this connection to the PC this allows to programm the radio directly in the Car Kit.

SUB-D extension 9-pin

Suitable for all Wetech Programming Stations with 9-pin SUB-D socket

Length: 1,8m

Power Cable

Length: 1,8m

USB-2.0 Cable with Connector A to Connector B

Length: 1m

Accessory kit for connecting components to active chargers

Consisting of a SUB-D-15 connector, cable grommet, connector housing, and strain relief.

Suitable, for example, for connecting an external speaker or a third-party speaker microphone.