Passive radio charger for your ICOM IC-F1000, IC-F2000

The WTC3204 is a robust, passive radio charger for the ICOM IC-F1000, IC-F2000 and ideal for all applications where pure, uncomplicated charging is required.
Thanks to its precise fit, the charger supports multiple battery types and provides stable contact – ideal for emergency services, industry, security, and all mobile environments.


##### Product description
The passive radio charger is small and compact. It provides fast charging and charge retention functions for your ICOM IC-F1000, IC-F2000 radio in your vehicle. The charging cradle is connected to the vehicle's electrical system.
An original belt clip is recommended for secure attachment.

##### New: LED Button for setting the target charge level

The new LED button allows you to easily switch the desired target charge level between 100% and 80%.
Maintaining the charge at 80% helps reduce strain on the battery by keeping the state of charge consistently lower. This helps preserve the battery during daily use and supports long-term capacity retention—especially useful when a full battery charge isn’t needed for every operation.
To switch between charging modes, remove the radio from the charger:

Press and hold the LED button until the desired color lights up:

- Green: 100% charge target
- Yellow-green: 80% charge target

After selection, the light turns off and the selected charge setting is confirmed by a brief flash of the LED in the corresponding color.
As soon as the radio is placed in the charging cradle, the LED indicates the selected setting and the charging process starts automatically.

Passive radio charger for your Motorola R5

The WTC3205PS is a robust, passive radio charger for the Motorola R5 and ideal for all applications where pure, uncomplicated charging is required. Thanks to its precise fit, the charger supports multiple battery types and provides stable contact – ideal for emergency services, industry, security, and all mobile environments.
Product description

The passive radio charger is small and compact. It provides fast charging and charge retention functions for your Motorola R5 radio in your vehicle. The charging cradle is connected to the vehicle's electrical system. An original belt clip is recommended for secure attachment.

##### New: LED Button for setting the target charge level

The new LED button allows you to easily switch the desired target charge level between 100% and 80%.
Maintaining the charge at 80% helps reduce strain on the battery by keeping the state of charge consistently lower. This helps preserve the battery during daily use and supports long-term capacity retention—especially useful when a full battery charge isn’t needed for every operation.
To switch between charging modes, remove the radio from the charger:

Press and hold the LED button until the desired color lights up:

- Green: 100% charge target
- Yellow-green: 80% charge target

After selection, the light turns off and the selected charge setting is confirmed by a brief flash of the LED in the corresponding color.
As soon as the radio is placed in the charging cradle, the LED indicates the selected setting and the charging process starts automatically.

Passive radio charger for your Motorola R2
Usable with batteries: PMNN4600, PMNN4598

The WTC3204 is a robust, passive radio charger for the Motorola R2 and ideal for all applications where pure, uncomplicated charging is required.
Thanks to its precise fit, the charger supports multiple battery types and provides stable contact – ideal for emergency services, industry, security, and all mobile environments.


##### Product description
The passive radio charger is small and compact. It provides fast charging and charge retention functions for your Motorola R2 radio in your vehicle. The charging cradle is connected to the vehicle's electrical system.
An original belt clip is recommended for secure attachment.

Passive radio charger for your Motorola R7

The WTC3206 is a robust, passive radio charger for the Motorola R7 and ideal for all applications where pure, uncomplicated charging is required. Thanks to its precise fit, the charger supports multiple battery types and provides stable contact – ideal for emergency services, industry, security, and all mobile environments.
Product description

The passive radio charger is small and compact. It provides fast charging and charge retention functions for your Motorola R7 radio in your vehicle. The charging cradle is connected to the vehicle's electrical system. An original belt clip is recommended for secure attachment.

Passive radio charger for your ICOM IC-SAT100

The WTC3001 is a robust, passive radio charger for the ICOM IC-SAT100 and ideal for all applications where pure, uncomplicated charging is required.
Thanks to its precise fit, the charger supports multiple battery types and provides stable contact – ideal for emergency services, industry, security, and all mobile environments.


#### Product description
The passive radio charger is small and compact. It provides fast charging and charge retention functions for your ICOM IC-SAT100 radio in your vehicle. The charging cradle is connected to the vehicle's electrical system.
An original belt clip is recommended for secure attachment.

Passive Car Kit for MOTOROLA radios GP320 bis GP680, GP1280, GP340ATEX, GP380ATEX and MTP850EX.
Usable with batteries HNN4003A, PMMN4159AR, HNN9008A, NNTN5510AR, NNTN5510CR, NNTN7383A, HNN4001A, HNN9013D, HNN9012AR, PMNN4151AR.

**General Description**

The passive Car Kit is small and compact. It provides the functions of fast charge and trickle charge for your radio in the vehicle.
The active function is displayed by the two LED.
The Car Kit is connected to the on-board power supply.
We recommand to use an original belt clip for a save latch.

**Advice**

The use of EX batteries in our product is technically possible, but may not be desired by the radio manufacturer.
The manufacturer's specifications are decisive here.

Passive Car Kit for SEPURA radios STP8X.
Usable with batteries 300-00910.

**General Description**

The passive Car Kit is small and compact. It provides the functions of fast charge and trickle charge for your radio in the vehicle.
The active function is displayed by the two LED.
The Car Kit is connected to the on-board power supply.
We recommand to use an original belt clip for a save latch.

**Advice**

The use of EX batteries in our product is technically possible, but may not be desired by the radio manufacturer.
The manufacturer's specifications are decisive here.

Car-Desk Charger for MOTOROLA radios DP3400, DP3401, DP3600, DP3601, DP2400, DP4401, DP4800, DP4801, DP2400E and R7.

**General Description**

For connection to an auxiliary battery.
This product must not be connected to the on-board power supply!

**Advice**

MOTOROLA radio DP3441 does not fit in the DC2-636. Available for this radio is WTC644.
The use of EX batteries in our product is technically possible, but may not be desired by the radio manufacturer.
The manufacturer's specifications are decisive here.

Car-Desk Charger for MOTOROLA radios DP3400, DP3401, DP3600, DP3601, DP2400, DP4401, DP4800, DP4801, DP2400E and R7.
**General Description**

For connection to an auxiliary battery.
This product must not be connected to the on-board power supply!

**Advice**

MOTOROLA radio DP3441 does not fit in the DC4-636. Available for this radio is WTC644.
The use of EX batteries in our product is technically possible, but may not be desired by the radio manufacturer.
The manufacturer's specifications are decisive here.

Car-Desk Charger for MOTOROLA radios DP3400, DP3401, DP3600, DP3601, DP2400, DP4401, DP4800, DP4801, DP2400E and R7.
**General Description**

For connection to an auxiliary battery.
This product must not be connected to the on-board power supply!

**Advice**

MOTOROLA radio DP3441 does not fit in the DC636-4KFZ. Available for this radio is WTC644.
The use of EX batteries in our product is technically possible, but may not be desired by the radio manufacturer.
The manufacturer's specifications are decisive here.

Car-Desk Charger for MOTOROLA radios GP320 to GP680, GP1280, GP340ATEX, GP380ATEX and MTP850EX.
**General Description**

For connection to an auxiliary battery.
This product must not be connected to the on-board power supply!

**Advice**

The use of EX batteries in our product is technically possible, but may not be desired by the radio manufacturer.
The manufacturer's specifications are decisive here.

Passive Car Kit for KENWOOD radios TK-2180, TK-3180, NX-200, NX-230EX, NX-330EXE, NX-300 and NX-5200E.
Usable with batteries KNB-31A, KNB-32N, KNB-33L, KNB-47L, KNB-70LEX*, KNB-48L and KNB-L1.

**General Description**

The passive Car Kit is small and compact. It provides the functions of fast charge and trickle charge for your radio in the vehicle.
The active function is displayed by the two LED.
The Car Kit is connected to the on-board power supply.
We recommand to use an original belt clip for a save latch.

**Advice**

The use of EX batteries in our product is technically possible, but may not be desired by the radio manufacturer.
The manufacturer's specifications are decisive here.