Passive Car Kit for SEPURA radio SC2020, STP8000 und STP9000.
Usable with original batteries.

**General Description**

The passive Car Kit is small and compact. It provides the functions of fast charge and trickle charge for your radio in the vehicle.
The active function is displayed by the two LED.
The Car Kit is connected to the on-board power supply.
We recommand to use an original belt clip for a save latch.

**Expansion for SEPURA SC21**
**Expansion for SEPURA SC21**

It is also possible to charge and program SEPURA SC21 radio in this Programming Station.
The Adapter Plate SC21 is inserted into the Charging Slot (see picture on the right).
The Adapter Plate is to purchase separately.

PassivPlus Car Kit for SEPURA radios STP8000 and STP9000.
Usable with original batteries.

**General Description**

Beyond to the usual functions of fast charge and trickle charge the PassivPlus Car Kit an external antenna adapter can also be connect.
The radio is locked by a push mechanism at the top of the Car Kit.
Additional Accessory can be connected by SUB-D socket, for example a RS232 programming cable. Please note the pin assignment (see below).
The Car Kit is connected to the on-board power supply.

PassivPlus Car Kit for SEPURA radios SC20.
Usable with original batteries.

**General Description**

Beyond to the usual functions of fast charge and trickle charge the PassivPlus Car Kit an external antenna adapter can also be connect.
In the WTC1902USB is an USB data interface integrated about this the Car Kit can be connected to the PC with an USB cable,
which allows to programm directly in the Car Kit.
The radio is locked by a push mechanism at the top of the Car Kit.
The Car Kit is connected to the on-board power supply.

Programming Station for SEPURA radios SC2020.

**General Description**

The programming station offers to program your radios with your programming software.
As soon as a radio is inserted into a charging slot, it is automatically recognized by the software and can be programmed.
In addition to programming, the standard functions of Fast Charge and Trickle Charge are given.
As usual is the active function displayed by the two LED on the Charging Slot.
The Programming station can be connected by USB connection to PC.

**Expansion for SEPURA SC21**
**Expansion for SEPURA SC21**

It is also possible to charge and program SEPURA SC21 radio in this Programming Station.
The Adapter Plate SC21 is inserted into the Charging Slot (see picture on the right).
The Adapter Plate is to purchase separately.

Programming Station for SEPURA radios SC20, STP8000, STP9000.

**General Description**

The programming station offers to program parallel up to 6 radios with your programming software.
As soon as a radio is inserted into a charging slot, it is automatically recognized by the software and can be programmed.
In addition to programming, the standard functions of Fast Charge and Trickle Charge are given.
As usual is the active function displayed by the two LED on the Charging Slot.
The Programming station can be connected by USB connection to PC.

**Special Solution**

This programming station was developed for the common SEPURA radios.
There are three charging slots for the STP8000 and STP9000 series and three charging slots for the SC20.

Programmierstation für MOTOROLA Funkgeräte MXP600 in Verbindung mit den Akkus PMNN4801, PMNN4802 und PMNN4582.

##### Allgemeine Beschreibung
Die Programmierstation ermöglicht es Ihnen mit Ihrer Programmiersoftware Ihre Funkgeräte bequem zu programmieren. Sobald ein Funkgerät in den Ladeschacht eingesetzt wird, wird es automatisch von der Software erkannt und kann programmiert werden.
Zusätzlich zum Programmieren, stehen Ihnen selbstverständlich die Standardfunktionen Schnellladung und Ladeerhaltung unserer Produkte zur Verfügung. Wie gewohnt wird die Ladung über 2 LED am Ladeschacht angezeigt.
Die Programmierstation kann über den USB-Anschluss am PC angeschlossen werden.

Programming Station for SEPURA radios SC20.

**General Description**

The programming station offers to program parallel up to 6 radios with your programming software.
As soon as a radio is inserted into a charging slot, it is automatically recognized by the software and can be programmed.
In addition to programming, the standard functions of Fast Charge and Trickle Charge are given.
As usual is the active function displayed by the two LED on the Charging Slot.
The Programming station can be connected by USB connection to PC.

PassivPlus Car Kit for SEPURA radios SC20.
Usable with original batteries.

**General Description**

Beyond to the usual functions of fast charge and trickle charge the PassivPlus Car Kit an external antenna adapter can also be connect.
A data interface is also integrated in the WTC1902SER. A RS232 programming cable, for example, can be connected here.
Please note the pin assignment (see below). To use the PEI function, an additional license for the radio is required.
The radio is locked by a push mechanism at the top of the Car Kit.
The Car Kit is connected to the on-board power supply.

Programming Station for SEPURA radios STP8000 and STP9000.
**General Description**

The programming station offers to program your radios with your programming software.
As soon as a radio is inserted into a charging slot, it is automatically recognized by the software and can be programmed.
In addition to programming, the standard functions of Fast Charge and Trickle Charge are given.
As usual is the active function displayed by the two LED on the Charging Slot.
The Programming station can be connected by USB connection to PC.

Programming Station for SEPURA radios STP8000 and STP9000.
**General Description**

The programming station offers to program parallel up to 6 radios with your programming software.
As soon as a radio is inserted into a charging slot, it is automatically recognized by the software and can be programmed.
In addition to programming, the standard functions of Fast Charge and Trickle Charge are given.
As usual is the active function displayed by the two LED on the Charging Slot.
The Programming station can be connected by USB connection to PC.

PassivPlus Car Kit for MOTOROLA radios MTP6550, MTP6650 and MTP6750.
Usable with batteries NNTN8020 and NNTN8023.

**General Description**

Beyond to the usual functions of fast charge and trickle charge the PassivPlus Car Kit an external antenna adapter can also be connect.
Additional the WTC623USB can be connected to the PC with an USB cable so the radio can be programmed directly in the Car Kit.
The radio is locked by a push mechanism at the top of the Car Kit.
The Car Kit is connected to the on-board power supply.

Programming Station for MOTOROLA radios MTP850, MTP850S, MTP850FuG, CEP400, MTH650 and MTH800.

**General Description**

The programming station offers to program parallel up to 6 radios with your programming software.
As soon as a radio is inserted into a charging slot, it is automatically recognized by the software and can be programmed.
In addition to programming, the standard functions of Fast Charge and Trickle Charge are given.
As usual is the active function displayed by the two LED on the Charging Slot.
The Programming station can be connected by USB connection to PC.

Programming Station for MOTOROLA radios MTP850, MTP850S and MTP850FuG.

**General Description**

The programming station offers to program your radios with your programming software.
As soon as a radio is inserted into a charging slot, it is automatically recognized by the software and can be programmed.
In addition to programming, the standard functions of Fast Charge and Trickle Charge are given.
As usual is the active function displayed by the two LED on the Charging Slot.
The Programming station can be connected by USB connection to PC.

Programming Station for MOTOROLA radios MTP3250 and MTP6750.
**General Description**

The programming station offers to program parallel up to 6 radios with your programming software.
As soon as a radio is inserted into a charging slot, it is automatically recognized by the software and can be programmed.
In addition to programming, the standard functions of Fast Charge and Trickle Charge are given.
As usual is the active function displayed by the two LED on the Charging Slot.
The Programming station can be connected by USB connection to PC.

Programming Station for MOTOROLA radios MTP3250 und MTP6750.

**General Description**

The programming station offers to program your radios with your programming software.
As soon as a radio is inserted into a charging slot, it is automatically recognized by the software and can be programmed.
In addition to programming, the standard functions of Fast Charge and Trickle Charge are given.
As usual is the active function displayed by the two LED on the Charging Slot.
The Programming station can be connected by USB connection to PC.

Adapter Plate SC21 is an accessory for our 1702 series from Wetech.
Additional to SEPURA SC20 you can also charge SC21 by inserting the Adapter Plate into the WTC1702 Car Kit.

**Please notice:**

The adapter plate is compatible with all WTC1702s from serial number UB-00621.
If you have an older model, please contact support@wetech.de.

DC Power Cable for connecting the SEPURA SRM3500 to the programming station.

**General Description**
Power Supply 230V AC
Specification: 12V / 1A DC

**Compatibility**

Suitable for all Wetech Car Kits and 1-fold Programming Stations.

Programming Station for MOTOROLA radios MTP850.
**General Description**

The programming station offers to program parallel up to 6 radios with your programming software.
As soon as a radio is inserted into a charging slot, it is automatically recognized by the software and can be programmed.
In addition to programming, the standard functions of Fast Charge and Trickle Charge are given.
As usual is the active function displayed by the two LED on the Charging Slot.
A special highlight of the DP6-692USB is the additional possibility of charging an additional battery in each charging slot.
This saves space for spare batteries in your Operations Control Center.
The Programming station can be connected by USB connection to PC.

Programmierstation für MOTOROLA Funkgeräte MXP600 in Verbindung mit den Akkus PMNN4801, PMNN4802 und PMNN4582.

##### Allgemeine Beschreibung
Die Programmierstation ermöglicht es Ihnen mit Ihrer Programmiersoftware Ihre Funkgeräte bequem zu programmieren. Sobald ein Funkgerät in den Ladeschacht eingesetzt wird, wird es automatisch von der Software erkannt und kann programmiert werden.
Zusätzlich zum Programmieren, stehen Ihnen selbstverständlich die Standardfunktionen Schnellladung und Ladeerhaltung unserer Produkte zur Verfügung. Wie gewohnt wird die Ladung über 2 LED am Ladeschacht angezeigt.
Die Programmierstation kann über den USB-Anschluss am PC angeschlossen werden.